Products
- Steel silo 鋼板倉
- Material tower 料塔
- Wet curtain 發酵罐
- Fan 風機
- -- 36/50 axial fan
- -- Fan accessories
- -- Butterfly wind turbine
- -- 50 variable frequency axial fan
- -- 36/50 cattle house fan
- -- 36/50 double column axial flow fan
- -- Unpowered fan
- Ventilation window
- FRP fan
- Pig bar
- Sheet metal stamping
Contact
Contact number:
13708969287
E-mail:[email protected]
Address:Chen Jia River Industrial Park, Mashan East Road, Jimo District, Qingdao City,PR China
How to choose a good chicken?
發表時間:2017/6/29 11:00:33
Chicken friend will understand the cages in the chicken breeding process, but also directly affect the chicken coop in the late development of the ecological environment, traditional customs, technical and economic level, the scale and purpose, broiler chicken varieties, can choose different types of cages cages, chicken cage, a chicken egg chicken breeding a brood of one cage.
The metal mesh bottom cages depends on the size of egg chicken and the short axis diameter size, mesh shoulds not be too close, too close not only affect the fecal leakage, but also make the cost increase hencoop. Bottom web longitudinal wire spacing should be not greater than the short axis of the egg 2/3, generally from 24 to 26 mm; the weft spacing is not greater than the length of the chicken 2/3, usually less than 50 mm. The bottom network is an important part of Keelung, should bear the weight of chickens, not to make the egg breakage groove of chicken eggs to fall in front end network, while most of the excrement can leak into the ground, reduce the net pollution; also to ensure easy to catch chicken wire, standing and walking stability and comfort. Therefore, the bottom network must have a certain strength, flexibility, slope and empty file, the choice of materials and manufacturing requirements are more stringent. Usually the bottom net material selection of low carbon steel wire 2 and a diameter of 2.5 mm, the solder joint to firmly; grid spacing should be uniform; 12% a 14% tilt height difference, in order to make the egg rolling smoothly, should make the bottom net wire in the upper longitudinal, transverse wire in the lower part.
Before the door of the cage network and the network is located in front of the cage wall, the main structure size before the network is vertical wire, the distance is not only to maintain a freedom of movement, and can't run for a chicken, 50 65 mm, net net roll gap relative to the bottom. As long as the egg is slightly larger than the short axis diameter. 50 mm, outside the cage. The design should pay attention to the size of the card just to the head, and not suitable for chicken run. The soil flat inclined, dish network below and the inclination of the same bottom net.
The metal mesh bottom cages depends on the size of egg chicken and the short axis diameter size, mesh shoulds not be too close, too close not only affect the fecal leakage, but also make the cost increase hencoop. Bottom web longitudinal wire spacing should be not greater than the short axis of the egg 2/3, generally from 24 to 26 mm; the weft spacing is not greater than the length of the chicken 2/3, usually less than 50 mm. The bottom network is an important part of Keelung, should bear the weight of chickens, not to make the egg breakage groove of chicken eggs to fall in front end network, while most of the excrement can leak into the ground, reduce the net pollution; also to ensure easy to catch chicken wire, standing and walking stability and comfort. Therefore, the bottom network must have a certain strength, flexibility, slope and empty file, the choice of materials and manufacturing requirements are more stringent. Usually the bottom net material selection of low carbon steel wire 2 and a diameter of 2.5 mm, the solder joint to firmly; grid spacing should be uniform; 12% a 14% tilt height difference, in order to make the egg rolling smoothly, should make the bottom net wire in the upper longitudinal, transverse wire in the lower part.
Before the door of the cage network and the network is located in front of the cage wall, the main structure size before the network is vertical wire, the distance is not only to maintain a freedom of movement, and can't run for a chicken, 50 65 mm, net net roll gap relative to the bottom. As long as the egg is slightly larger than the short axis diameter. 50 mm, outside the cage. The design should pay attention to the size of the card just to the head, and not suitable for chicken run. The soil flat inclined, dish network below and the inclination of the same bottom net.